Laser marking machine is a highly automated technology, so it often has common failures. Many users are faced with the problem of being unable to use the laser engraving machine to input text. If you know the common faults and solutions of these laser marking machines, you can also change from Xiaobai to Dashen
Consider the general error conditions of the laser marking machine.
1. It runs well, but suddenly it can't be written. Check for software alerts. If there is no alarm, the laser generator may not have laser power.
2. It can't be written until it is used for a long time: ensure that the focal length of the lens does not change
When inserting the laser marking machine into the computer, make sure that the laser path or color light is running. However, if this does not happen, it may be an attention problem. Do not loosen the length of the lens or laser. If there is no movable trace, it may be a typical galvanometer scanning error or a main control board error.
Unable to enter text after deleting or changing the calculator - please make sure your phone software preferences are correct
Failure to display the F2 laser flag will result in normal machine failure. This may be due to the following reasons:
1. The laser marking type is set incorrectly in the mobile phone software for laser marking.
2. The laser beam path is incorrect.
3. The laser generator is not connected or damaged.
4. The power cord is unplugged or unplugged, or the LED software is faulty.
5. The laser generator of the laser marking machine is damaged.
Solution: First press F2, then press F3, and then click the starting port to view and adjust the number according to the starting symbol. You can test 0 to 15 separately. Equipment may vary by manufacturer.
What is a laser marking machine? What does this have to do with jewelry? Today, the reporter reported that the laser marking machine also plays an important role in the decoration of many ornaments. What is a laser marking machine? Look at the following.
The laser pen is an oil based marker that allows the laser beam to mark the surface of another material. Symbols can be text, graphics, or trademarks. If so, how is this achieved? The evaporation of surface substance is a deeper substance, or it is caused by chemical and physical changes of surface substance due to the "cutting" of light energy, or it is caused by light energy burning off some substances to form a pattern. The text to delete.
There are many text marking machines, why choose laser marking machine? This is mainly because the machine is more precise, which is suitable for the time when higher precision is needed. When selecting high-quality equipment, jewelry should look natural. Some of my friends like to keep their jewelry beautiful without damaging it by carving or adjusting the beautiful design obtained by laser engraving machine.
▲ Excellent beam quality: beam quality is better than that of traditional solid-state laser marking machine. This is the main print mode (TEMOO), and the focal length is less than 20. The divergence angle is 1/4 of the diode pumped laser. It is especially suitable for accurate and fine marking.
▲ Low operation cost: the electro-optical conversion rate is 30%, the power consumption of the whole machine is below 500W, which is 1/10 of the semi-automatic laser marking machine- Energy saving lamp pump controller.
Free maintenance: The laser does not require maintenance, lens adjustment or lens cleaning.
▲ Long laser life: when using laser diode as the pump source, the average working time can reach 100000 hours.
Small size, adaptable to harsh environment: the laser can realize long-distance laser transmission through optical cable, with compact structure. Good heat dissipation effect, no large area of water cooling is required, simple air cooling is enough. It can also work well in harsh environments such as shock, vibration, high temperature and dust.
▲ Fast heating speed: the processing speed is 2 to 3 times faster than that of the traditional laser marking machine.
The laser marking machine is also widely used. For example, electronic components, electrical appliances, telecommunications, gas and motorcycle accessories, precision equipment, gifts, medical equipment, glasses and watches, health and medical equipment and products. Other industries.
The pen core laser marking machine can fill the specified image. The form you filled in must be placed in a closed basket. If you select multiple objects to fill, they can be nested or unrelated, but they cannot intersect two objects.
Filling 1, Filling 2, and Filling 3: use the laser marking machine: this means that three independent filling parameters can be set simultaneously for the filling operation. The cross fill can be run at any angle, and each fill can handle 4 different types of fill (4 types of fill are single-sided fill, double-sided fill, circular fill, and double-sided fill respectively. Optimized. Please refer to).
Enabled: Enables the current fill setting.
Overall calculation: This is a simplified version. When this option is turned on, all objects that do not contain themselves are counted as a whole when calculating the fill, which may speed up processing. (Enabling this option slows down the computer's calculation speed.). Otherwise, each independent area is calculated separately.
For simplicity, let's look at this function with a specific example.
Example: Draw three independent rectangles on the canvas, fill the lines between 1mm, and fill with a 0 degree angle.
Turn off Stop Count Objects. During processing, fill lines of objects are marked one by one according to the processing order of the target list, namely TIME. First select the fill graph for one object, and then select the next object.
2. Click Calculate Size. In this process, I immediately selected all the fill strokes. In other words, hatch lines appear together on the same line of multiple objects.
Partial fill: The fill line is always filled from left to right.
Double sided filling: the filling line is filled from left to right first, and then from right to left. The others are repeated.
Round charge. A hatch line is a hatch that moves the outline of an object from the outside of a circle to the inside.
Optimized double fill: Similar to double fill, but forms a fill line between the ends of the connector.
Filling angle: when the filling angle is 45 degrees, the included angle between the filling line and the X axis is as shown in Figure 10. 3-6．
Fill Leading: Specifies the spacing of lines near the fill line.
Hatch Line Edge - Specifies the distance between the hatch line and the profile object in all hatch calculations. As shown in the figure. 3.7 The distance between the filling line and any side of the object is the margin.
Step 1: After the filling calculation is completed, add a boundary map around the wall. As shown in Figure 1, there is a box around the fill line. 3-8。
Divide Fill Lines Evenly - corrects the uneven distribution of the first and last fill lines of the filled object. According to the size of landfills and the distance between landfills, the distribution of landfills at the starting and ending points of landfills may be uneven. To make work easier, this function is added to allow users to achieve the goal of evenly dividing all filler lines without changing the line spacing. If checked, the software automatically sets the shadow range to the user-defined shadow range to smooth the shadow lines.
Start Offset Distance: Specify the distance between the first fill line and the edge.
End Offset Distance: Specify the distance between the last fill line and the edge.
Automatic rotation of filling angle: when this option is checked, the laser device will automatically rotate the filling line to the specified angle as soon as the user selects it. That is, if the angle is set to 0 degrees and the automatic rotation angle is set to 30 degrees, the angle of the first label is 0, the second label is 30, and then 60, 90... The method is as follows:. For example, it can be used to display a form.
Line Indent - Indicates the indent at both ends of the fill line. A positive value is the filling amount and a negative value is the expansion amount. This is useful when working with the main image and when you want to keep a small distance between the two ends and the contour of the fill line.
Number of support rings: set the number of ring extensions before horizontal filling. If the tire can be fully inflated, the last tire may be inflated unevenly, so this function is used to solve this problem.