The metal processing industry is becoming stronger and stronger. Can he cut all metal materials? We all know that the metal laser cutting machine is not only of good quality, but also has intelligent cutting conditions, non-contact processing. Let's take a look at whether the metal laser cutting machine is suitable for cutting any material.
1. Stainless steel cutting
Laser cutting is an effective processing tool for the manufacturing industry using stainless steel sheet as the main component. Under the strict control of the heat input in the laser cutting process, the heat affected zone of the trimming can be limited to be very small, thus effectively maintaining the good corrosion resistance of such materials.
2. Carbon steel cutting
The metal laser cutting machine is used to cut carbon steel plates with a thickness of 25 mm. The advanced laser technology is adopted, with good beam quality, small slits, and smooth cutting surface. Cutting carbon steel plates with a thickness of less than 5 mm only requires air blowing, not oxygen blowing, which greatly saves the user's cost of using oxygen.
3. Cutting of copper materials
Why is it necessary to add auxiliary gas to cut high reflective metal materials? When metal laser cutting machine is used to cut metal copper, the added auxiliary gas reacts with the material at high temperature and increases the cutting speed. For example, using oxygen can achieve combustion supporting effect. For laser cutting equipment, nitrogen is an auxiliary gas to improve the cutting effect. For copper materials below 1MM, metal laser cutting machine can be used for processing.
Therefore, when using the metal laser cutting machine, it is unnecessary to worry about whether it can cut off. At this time, attention should be paid to the processing effect, so nitrogen is used as the auxiliary gas. When the thickness of metal copper reaches 2MM, it cannot be processed with nitrogen. At this time, oxygen must be added to oxidize it to achieve cutting.
4. Cutting of other metal materials
The laser cutting machine is suitable for non-contact cutting, hollowing and punching of various metal plates. With the advantages of high precision and high speed, it has become the development direction of sheet metal processing technology.
These are the common cutting materials of metal laser cutting machine, and the cutting efficiency is also greatly improved, so it can be popularized in a short time.