Laser cutting machine is a relatively precise machining equipment. Any small problem will lead to the use performance of the whole equipment. Therefore, the entire production and assembly process of the laser cutting machine manufacturer is very strict. In addition, after the production of the whole laser cutting machine equipment is completed, the commissioning and operation stage will be conducted to test the stability of the equipment. Occasionally, some small problems will inevitably occur. Let's analyze the fault of the laser cutting machine through some small problems.
Laser cutting technology
A. The burr is serious when laser cutting sheet metal. In this case, first analyze whether the laser power meets the standard, then check whether the laser works normally, and then conduct correct debugging. Secondly, analyze whether the focus of the laser cutting machine is accurate, and then adjust it according to the offset.
B. The laser cutting machine cuts opaque workpieces. In this case, first of all, check whether the mirror is intact or stained, which directly affects the laser conductivity. Secondly, check whether the laser tube has attenuation marks. If the energy is not reached, the cutting performance will be greatly affected. Remember to replace it in time.
C. The beam vibrates when the laser cutting machine is running. The probability of such clarity is relatively low. Generally speaking, this situation is caused by the lax manufacturing process. A large part of the reason is that the slider clearance is too large, and the motor and the driver are in poor contact, which should be handled and solved in time.