As the temperature rises in summer, the working pressure of the cooling system of the laser cutting machine increases. It is recommended to maintain the pressure of the cooler before the high temperature comes. The equipment pressure of different manufacturers is also different. It is recommended to consult the specific parameters of the equipment manufacturer before maintenance.
Make sure that the laser tube is full of circulating water before the machine works. The quality and temperature of circulating water directly affect the service life of the laser tube. Therefore, it is necessary to regularly replace the circulating water and clean the water tank. This is best done once a week.
There will be some mirrors and focus lenses on the machine. The laser is reflected and focused through these lenses and then emitted from the laser hair.
The lens is easy to be stained with dust or other pollutants, causing laser loss or lens damage. So clean the lens every day. Pay attention to:
The lens should be wiped gently without damaging the surface coating;
The wiping process should be handled with care to prevent falling;
When installing the focusing lens, be sure to keep the concave face downward.
Due to the high temperature in summer, the deterioration rate of cooling water will also accelerate. It is recommended that users of laser cutting machine use distilled water or pure water, and regularly clean the scale, so as not to cause the scale attached to the laser pipe and affect the laser power. Different types of laser cutting machines have different methods of cleaning scale, which need to be operated under the guidance of the manufacturer.
Since the dust of the laser cutting machine is mainly metal powder, it is recommended to regularly clean the dust in the electrical cabinet of the laser cutting machine and check the working condition of the cooling fan.
Regular maintenance of the equipment can avoid some problems in the use of the laser cutting machine, increase the service life of some accessories and equipment performance, and then increase the working efficiency of the equipment. Therefore, in addition to the maintenance of the laser cutting machine in summer, we should also regularly carry out daily maintenance of the laser cutting machine.