At 38 ℃, people are afraid of heat, and the cutting equipment needs to be cooled in high temperature weather. Because summer is an accident prone event. Therefore, when using the laser cutting machine, we need to pay attention, which is not as simple as you think. So how should we use the laser cutting machine in summer?
Article 1: speed up heat dissipation
Each laser cutting machine has its own heat dissipation system, but with the extension of working time, the heat dissipation system of the laser cutting machine may absorb dust in the air or a small amount of residue left during cutting, which will affect the air circulation of the equipment. Therefore, in hot summer, we should increase the cleaning frequency of the cooling system to ensure the good cooling performance of the laser cutting machine.
Article 2: maintain proper water cooling temperature
The cooling liquid should be distilled water or pure water, and it should be cleaned regularly to avoid scaling in the laser and pipeline and affecting the laser power.
It should be noted that the temperature difference between cooling water and air should not be too large. It is recommended to set the temperature at about 25-32 degrees. The temperature in summer is very high, and the working pressure of the cooling system of the laser cutting machine increases sharply, so check the internal pressure of the cooler before the high temperature comes, and make appropriate adjustments to adapt to the high temperature weather.
Article 3: cleaning up and "rest"
Pay attention to cleaning the guide rail and rack of the equipment, and properly lubricate these parts to ensure the smooth operation of the machine. At the same time, in high temperature in summer, the equipment should not be operated for a long time, and the operation time of the machine should be adjusted to be slightly shorter than that in other seasons.
Cooling the laser cutting machine in summer can effectively increase the service life of the machine, reduce maintenance costs, and achieve more efficient and high-quality cutting!