The fiber laser cutting machine itself uses the laser generator as the condition of the whole cutting. Such a device has a series of new developments in the world. Of course, it can effectively gather some high-energy beams. At the same time, it can also concentrate these beams on the surface of the whole workpiece, and then make a series of light spots produced by them melt instantly, Automatic cutting can be achieved directly through some systems. In this case, most people may be concerned about the advantages of fiber laser cutting machines?
Judging from the current situation, the advantages of fiber laser cutting machine are relatively good. For example, the whole focusing spot is still very small, and the lines are very fine when cutting. The working efficiency is very high, and the processing quality is very good. It has a very high cutting speed. At the same time, compared with the laser cutting machine with the same power of carbon dioxide, The speed of the whole fiber laser cutting machine is basically twice that of the original.
All of the fiber laser cutting machines are the world's top imported laser cutting machines, and their performance is very stable. In the process of use, their service life can definitely reach more than 100000 hours. Of course, they also have a very high photoelectric conversion efficiency. From the current situation, this conversion efficiency is basically about 30%, And the conversion efficiency of the whole fiber laser cutting machine has reached about three times that of the original carbon dioxide laser cutting machine, which is a very energy-saving and environmental protection conversion efficiency.