It is difficult for the laser cutting machine sold and the large format laser cutting machine. Before delivery, the laser cutting machine needs to be disassembled into several parts. After transportation to the customer, it needs to be reassembled and debugged. The process is complex.
Precautions for laser cutting machine installation; In the process of installation, in order to obtain the determined coordinate position and undistorted operation function, the installation quality of the laser cutting machine directly affects the processing function and service life. Once the optical element is polluted or even adhered to the small particles of the cutting products, its cleaning is a very important and often ignored problem. Here are some cleaning points:
(1) The lens must be cleaned daily: bend the lens wiping paper into several folds and soak it with a few drops of analytical pure acetone; Gently wipe the lens surface with wet lens paper, and be careful not to press the lens with your fingers; Repeat several times until the surface of the lens is clean and free of dirt and residual traces; Dry with dry air; If necessary, roll the lens paper wet with a few drops of acetone into a rod, and gently scrub the lens surface to remove heavy dirt drops.
(2) The mirror lens should also be cleaned on schedule to remove dirt: remove the lens from the frame; With the mirror face up, put the lens paper on the mirror; Drop a few drops of acetone on the lens paper, and gently pull the lens paper over the mirror; Repeat the above procedures until the mirror is clean and free of dirt and residues; Then install the lens into the lens base.
All kinds of problems encountered in the transportation and installation of laser cutting machines require us to make corresponding preparations, and only after we have made corresponding preparations can we ensure that we can obtain customer recognition in the sales of laser cutting machines.