With the popularity of laser pipe cutting machines, customers have more and more requirements for laser pipe cutting machines. For example, if you want a laser pipe cutting machine to cut various shapes, it is not as simple as you think to use a laser pipe cutting machine to cut a round hole. Here are some points to pay attention to when cutting a round hole with a laser pipe cutting machine:
First, when cutting a round hole with a laser pipe cutter, the first thing to pay attention to is that the time for cutting a round hole is naturally the best one-to-one cutting plan, and generally, the size and difficulty of the aperture are inversely proportional. When the aperture is required to be larger, the natural difficulty becomes smaller. It is necessary to judge whether the cutting plan of the laser pipe cutter we use is satisfactory, Otherwise, lack of talent will lead to irregular round holes and too many breakpoints.
Second, when the laser pipe cutting machine operates the round hole, it should also pay attention to the problem of gas pressure. When the gas pressure is too high or too low, it is often impossible to cut, because too low pressure will lead to rough cutting edges, and high pressure is also very dangerous. Therefore, when using the laser pipe cutting machine, it is necessary to pay attention to the pressure problem at all times.
Third, the laser pipe cutting machine should be debugged before cutting. Generally, it is debugged with waste materials, and the operators should also be professionally trained, because the operation level of the laser pipe cutting machine will also affect the cutting effect after all. As long as the accuracy planning of the equipment meets the requirements, the operators can cut the round hole we want only if they are skilled, And always pay attention to the maintenance of the laser tube cutting machine.