The laser in the fiber laser cutting machine is an easy aging component, so we should pay attention to this problem in normal use. The following editor will introduce the causes and solutions of laser aging of the equipment.
1. The laser itself has problems.
2. When the power drops to affect production, the laser and external optical path should be maintained. After the maintenance, the cutting capacity will return to the factory level.
3. It is necessary to regularly maintain the external optical path of the laser generator. In fact, after the laser of the laser cutting machine works for a period of time, the power decline is inevitable.
4. Each guide rail should be cleaned frequently to remove dust and other debris, so as to ensure the normal operation of the precision fiber laser cutting machine.
5. If the quality of compressed air (mainly oil filtration, dryness, dust). There is a lot of dust and smoke on the production site, and some users put the painting operation near the fiber laser cutting machine, which will affect the cutting quality and cutting ability of the fiber laser cutting machine.
6. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently, so that the machine can move better and cut more accurately, and the quality of the cut products will be improved.
The use of cooling water can reduce the heat generated in the use of optical fiber laser cutting machine, so that the motor of the equipment can maintain the normal temperature, so that the use of optical fiber laser cutting machine will be more stable. It is required to replace the cooling water of the fiber laser cutting machine once every three months, and its conductivity is required to be 30us/cm< conductivity <50us/cm If the conductivity is greater than 50us/cm, replace the cooling water in time; If the conductivity is less than 30us/cm, tap water can be added to the cooling water. When adding tap water, pay attention to monitor the conductivity value to avoid exceeding the requirements. The case of the fiber laser cutting machine adopts a closed design. Please pay attention to keeping the chassis closed during use to prevent external high-temperature and high humidity air from entering the chassis.