What are the common precautions for the application of fiber laser cutting machine? Because laser is a very dangerous product, the proper application of fiber laser cutting machine is very critical. We must grasp the use skills of laser cutting machine, follow the instructions, and strictly carry out the actual operation according to the use methods of laser cutting machine. The following is about the proper application and prevention of fiber laser cutting machine.
Before application, pay attention to check whether the power supply voltage is consistent with the rated current of the machine, so as to prevent unnecessary damage; Check whether the exhaust pipe of the optical fiber laser cutting machine is placed at the air outlet to prevent blocking air convection; Check whether there are other impurities on the workbench of the machine and equipment; The staff who actually operate the machine and equipment must be trained by the laser cutting machine manufacturer before entering the post; During the production and processing of raw materials, be sure to wear necessary protective equipment, such as goggles; Avoid using laser to carry out direct radiation and production and processing without knowing the raw materials of production and processing; After the laser cutting machine is started, full-time staff must be present to avoid leaving without permission. If you need to leave, you should turn off the machine and equipment; Fire extinguishers and other machinery and equipment are required around the production and processing of optical fiber laser cutting machines;
In case of abnormal conditions during the production of fiber laser cutting machine, it should be shut down immediately, and then find professional staff to carry out the inspection of fiber laser cutting machine; After application, the fiber laser cutting machine and equipment must be cleaned immediately to make sufficient preparations in advance for the next production and processing; Inspect consumables such as laser tubes and auxiliary gases on time; During the operation of the laser cutting machine, we should pay attention to observe whether every small detail of the machine is abnormal; The laser is invisible light, which will cause serious damage to both eyes. It is forbidden to look at the laser beam; During the operation process of the laser generator, it is forbidden to open the cover of the laser generator; It is forbidden to wear metal objects for actual operation, which is likely to cause electric shock accidents; It is forbidden to accumulate inflammables such as printing paper and oil in the operation area of laser cutting machine;