Metal laser cutting machine is an important equipment for sheet metal processing, and the correct use of laser cutting machine is also an important premise to improve its service life. Therefore, after purchasing the machine, you must master the standard and standardized machine operation procedures and methods to reduce the failure rate and increase the service life. Next, we will introduce the standard and standardized operation process of the laser cutting machine:
First of all, we must strictly abide by the regulations, follow the principle of turning on and off the laser cutting machine equipment, and do not forcibly turn off or turn on the laser cutting machine equipment.
Secondly, employees are not allowed to operate the machine without training. Only after comprehensive training can they operate on the machine.
Third, in the working process of metal laser cutting machine, outsiders are not allowed to approach the operating table and operating table, and the core operations must be completed by professionals;
Fourth, adjust the light path of the machine tool, use the follow-up method to adjust the cutting head, and force the follow-up precise control procedure to ensure the safety of man-machine.
Fifth, every time you open the machine, you need to return to the reference point, check and deal with the focusing lens, calibrate the coaxiality of the beam nozzle, open the cutting auxiliary gas, and the pressure in the bottle should not be less than 1MPa;
Sixth, check the external light path protective gas, freezer, cooling channel, air compressor, freeze dryer and drainage filter of laser cutting machine equipment once a week.
Characteristics of metal laser cutting machine:
1. Determine the size of the support layout according to the size of the metal laser cutting machine. Only the support suitable for this size can play the function of the metal laser cutting machine;
2. Ensure that the metal laser cutting machine can be placed on the support, stop the high-speed and stable operation, and ensure that the metal laser cutting machine can be placed on the metal laser cutting machine stably;
3. In order to ensure the connection between the frame of the metal laser cutting machine and various components, a stable connection can make the operation of the metal laser cutting machine more stable.
The above is the specific introduction of the installation of the metal laser cutting machine frame. Through the above methods, the metal laser cutting machine can stop running more stably.