Laser Cutting Machines
How to solve the aging problem of metal laser cutting machine
2022-07-18 09:56:48 technical college

Among the components of metal laser cutting machine, the laser is easy to age, so in daily use, both operators and business owners should pay attention to it. How to slow down the aging of metal laser cutting machine? In fact, there are two reasons for the power reduction of fiber laser cutting machine:
First, the machine needs to regularly check and maintain the external light path of the laser generator. In fact, the power of metal laser cutting machine will decrease after continuous use for a period of time. When the power drops to affect production, the laser and external optical path should be maintained. When the maintenance is completed, the cutting capacity will return to the factory level.
Laser maintenance: the laser is the head part of the metal laser cutting machine. Its quality directly affects the performance of the metal laser cutting machine. If there is a problem with its quality, it will accelerate the rapid aging of the metal laser cutting machine. Therefore, choosing high-quality lasers is the key. In addition, the later maintenance work is also very important. Just like a person, the best skin also needs maintenance. Only by doing enough daily care and maintenance can we delay aging and make youth longer. After the laser works for a period of time, the power decline is inevitable. Therefore, doing a good job in the maintenance of the laser at ordinary times can try to keep the laser function at a standard and delay the aging problem of the laser.
Secondly, the environment and conditions of the production site have a great impact on the power of metal laser cutting machine. Such as the quality of compressed air. There is a lot of dust and smoke on the production site. Some users put the painting operation near the fiber laser cutting machine, which will affect the power of the fiber laser cutting machine, and then lead to the decline of cutting quality and cutting capacity.
Operating environment of metal laser cutting machine: the operating environment of metal laser cutting machine (such as temperature and dust) metal laser cutting machine has certain requirements for the temperature of the working room. Too high temperature will cause crash and slow response, and too low temperature can cause damage to gas pipes and cables, easy to break and air leakage. Therefore, controlling the temperature of the working environment of metal laser cutting machine is one of the key factors to delay aging. In addition, the metal laser cutting machine will produce a large amount of metal dust in operation. These dust, as well as the dust and smoke in the air, will attach to the equipment, which will increase the wear between various parts of the equipment. At the same time, the attached dust will also affect the light transmittance of the focusing lens, indirectly affecting the cutting accuracy of the metal laser cutting machine.
The aging of metal laser cutting machine is an irresistible trend. How to protect and delay the aging is the key problem. We hope users can do a good job in maintenance in their daily work. In addition, if there are any problems in the work of the equipment, they must not be ignored, and they must be handled in time to keep the equipment in good condition.

Hot keywords

Redsail Tech Co. © 2002-2022. All Rights Reserved.

Contact us