Autumn is thick and light and cool, which is the time for hard work and a good time for manufacturing and processing enterprises to enrich their product lines. At present, the laser cutting machine is worth adding to the metal processing industry. Large equipment should pay attention to the operating environment when working. Once it is operated in a place that does not meet its working environment, it will not only affect the working efficiency of the equipment, but also cause serious losses. So what should be paid attention to when the laser cutting machine is running?
Ambient temperature:
The laser cutting machine is recommended to operate in a constant temperature environment. Only in this environment can the processing accuracy and normal operation of the equipment be guaranteed. The working temperature of semiconductor in laser cutting machine is required to be below 40 ℃, and the temperature of motor cabinet is generally higher than room temperature. Once the equipment temperature is too high, the failure rate will also increase. Since the laser cutting machine uses distilled water or purified water as the cooling medium, the operating ambient temperature of the laser should be above 5 ℃, so in order to make the system work well, the ambient temperature should be controlled above 5 ℃, but not more than 35 ℃.
Environmental humidity:
The relative humidity of the working environment of laser cutting machine is generally less than 70%. In the environment of high temperature and high humidity, once the equipment is shut down, the internal and external temperature difference is too large, and the water in the air will form condensation on the main board parts. The condensation cannot evaporate in a short time, which will cause short circuit of the equipment and serious equipment failure after restart.
Environmental dust:
In the long-term cutting process of the equipment, the fine dust cut will fly around without treatment, which will seriously affect the health of the operators. If the electric cabinet is not closed or there is a gap, the conductive dust will be deposited on the circuit board, which will cause electrical damage. It is suggested that the laser cutting machine should be equipped with good dust removal equipment.
Wiring:
The normal operation of the equipment must be well grounded. Other lines should not be exposed to the environment as far as possible. If they must be exposed to the environment, appropriate protection should be carried out to avoid accidents such as motor failure caused by the damage and melting of line colloid. The internal wiring routing should be smooth, and the lines should be clear and not entangled as much as possible. All routes should be classified and fixed for convenient maintenance.