1. Advanced cutting technology
The cutting principle adopted by the fiber laser cutting machine is a high-performance laser cutter. During the cutting process, the laser will emit countless high-performance and high-energy laser rays. The huge energy generated by these laser rays can instantly vaporize the cutting surface, so that the very hard interface can be easily removed. At present, this process is still the most advanced cutting process, and no other cutting process can surpass it. Moreover, this cutting process is very fast in the cutting process. It can easily cut very thick steel plates instantly, and the cutting accuracy is also very accurate. The cross-section accuracy of cutting can reach about a few millimeters, which can fully meet some high cutting requirements.
2. The cutting performance is very stable
During the cutting process, the laser cutter uses an extremely stable world-class laser. The service life of this kind of laser will be as long as several years, and in the process of use, except for human factors, there will be almost no failure of the system itself. Therefore, even if this kind of laser cutter is under long-term working pressure, it will not produce any vibration or other adverse effects.
3. The mechanical operation process is very convenient
In the process of using optical fiber laser cutting machine, all information transmission and energy transmission are transmitted through optical fiber. The biggest advantage of transmission in this way is to save a lot of human and material resources, and there will be no optical path leakage in the transmission process. And before using the device, it can easily transfer energy to the laser without any adjustment of the optical path.
4. The volume of the machine itself is very small
This kind of laser cutter has only one core component, that is, the laser that emits laser. Moreover, the production volume of the laser is very small, and it will not occupy a lot of space like other cutting products of the same type. In this way, the overall volume of the machine will be greatly reduced, which can reduce a lot of human and material resources for us in the process of mechanical production or transportation.
5. There are many kinds of processing
Because there is no contact processing, and the energy and moving speed of the laser beam of the fiber laser cutting machine can be adjusted, a variety of processing can be realized. The variety of processing materials is one of the biggest advantages of fiber laser cutting machine. It can be used to process a variety of metals and non-metals, especially materials with high hardness, high brittleness and high melting point.
6. Less processing consumption
The heat affected zone of the workpiece processed by laser is small, the thermal deformation of the workpiece is small, and the subsequent processing volume is small.