Laser Cutting Machines
How to deal with the slag of pipe laser cutting machine?
2022-07-07 10:18:17 technical college

The application of pipe fitting laser cutting machine is more and more extensive. Many industries begin to use pipe fitting laser cutting machine as the processing equipment for processing workpieces. In the process of cutting workpieces with pipe fitting laser cutting machine, a large amount of slag will be produced. If these slags are not cleaned in time, the production efficiency of the pipe fitting laser cutting machine will be reduced, and even the normal use of the pipe fitting laser cutting machine will be seriously affected. First, let's talk about how to clean the slag of the pipe fitting laser cutting machine:
Laser cutting machine
1、 Let's talk about the causes of slag.
When cutting the workpiece by the pipe laser cutting machine, it mainly depends on the heat generated by the laser beam to melt the surface contacting the workpiece. If the thickness of the metal workpiece is too thick, the heat transfer of the laser beam to the bottom of the workpiece will be insufficient, and the workpiece cannot be fused perfectly, resulting in a large amount of molten slag. Under the high temperature and high pressure environment of the pipe laser cutting machine, the slag accumulates at the bottom of the workbench and cannot be cleaned in time.
2、 Slag treatment method
When cutting a workpiece with a pipe fitting laser cutting machine, a fusing layer will be formed on the surface of the workpiece, and the slag generated in the fusing process will have a reasonable range. The slag range generated by workpieces of different materials is also different, which can be reasonably controlled. Therefore, before cutting the workpiece, we can set reasonable cutting parameters according to the shape and nature of the workpiece to reduce the generation of slag.
When the laser cutting machine for pipe fittings is finished, the generated slag can be cleaned by professional slag removal equipment, and the generation process of slag can be controlled by changing the moving speed of the laser head of the laser cutting machine for pipe fittings, so as to reduce the generation of slag.

Hot keywords

Redsail Tech Co. © 2002-2022. All Rights Reserved.

Contact us