Laser Cutting Machines
How to check and repair the failure of the panel display of laser cutting machine?
2022-07-07 10:11:29 technical college

Many customers may underestimate the role of the panel. As you know, it is a command center. We compare the motherboard to the brain, which display panel is limbs; All of our possibilities are generated in the brain, and so the actual operation depends on our limbs. We can see the importance of the panel.
Once there is a problem with the panel, the whole equipment will not work. How to judge whether it is the problem of the panel becomes very important. Why can we repair it? Today, let's talk about this topic.
In the control part of the laser cutting machine, there are many paths. In addition to the commonly used panel, there are computer software; Maybe many customers don't pay much attention. In the laser software, it has a keyboard part with the same function as the panel, and its function is exactly the same as the panel; When there is a problem with the panel, if it is connected to the motherboard, it will pass some misinterpreted instructions to other control departments, such as drive, or light out, etc;
To judge whether there is a problem, it is very simple. We unplug the panel cable of the laser cutting machine and make it not connected with the motherboard, so that it cannot control any part of the device. If the device returns to normal after unplugging the panel cable, it is the panel problem. If it is the same, we should consider other aspects.
In fact, the maintenance of laser cutting equipment is quite simple, which is not as complex as people think. We can use the method of elimination to find problems, and gradually narrow down from a large range, from difficult to easy.
When you suspect that there is a problem with the panel of the laser cutting machine in the future, you can eliminate it in the way taught above, and you can easily find out the problem.

Hot keywords

Redsail Tech Co. © 2002-2022. All Rights Reserved.

Contact us