The stone carving machine can not be distinguished even if it is seen on site. Most customers do not know the stone carving machine. This requires us to know the power of the specific carving machine spindle, the power of the motor, and whether the drive is a cheap drive plate or a driver with stable quality.
The next one is the cutting quantity, which is not only an important parameter determined before the adjustment of the machine tool. High productivity and low processing interest are also related to the cutting quantity. Whether its value is reasonable or not has an important impact on the processing quality, processing power and production interest. Therefore, a reasonable cutting amount is the premise to ensure the quality by making full use of the cutting function of the tool and the power function (power and torque) of the machine tool.
Ensure that the cutter of the engraving machine is completed at least once, and the use of the cutter shall be determined according to the accuracy and surface roughness of the parts. Compared with the normal machine tool processing, the woodworking engraving machine has a large processing capacity, and it avoids changing the cutter in the middle of cutting. The engraving machine has high requirements for the cutter, high precision, stable scale, convenient equipment adjustment, and meets the high power requirements of the NC machine tool.
The programming personnel of the stone carving machine need to determine the cutting amount of each process and select different cutting amounts. The selection principle of the cutting amount is to ensure the machining accuracy and surface roughness of the parts. The cutting tool material selected on the NC machine tool is usually the cutting tool material, and the convertible blade is used. During NC programming, it is written into the program in the form of instructions. Cutting amount includes spindle speed, cutting amount and feed speed. For different processing methods and different tool functions, it is necessary to ensure reasonable tools and give full play to the functions of machine tools to reduce interest.
The standard dimensions of engraving machine accessories shall be consistent with the overall dimensions of carpenters' processing workpieces, that is, small workpieces shall be processed by small standard machine tools, equipment shall be used reasonably, and large workpieces shall be processed by large standard machine tools.