1. point engraving
Point engraving is a high-definition point printing method. The laser head swings around the printing material, engraving one line at a time, and then moves the laser head up and down at the same time to draw several lines to form the image or text of the whole version. You can scan graphics, text and vector text with dot matrix engraving.
2. cutting vector
Unlike dot matrix carving, vector cutting is performed on the outline of the text. We usually use this mode to carve wood, PVC, paper and other materials, but it can also be used for marking materials. The performance of laser engraving machine mainly depends on the engraving speed, engraving intensity and point size.
3. engraving speed
The engraving speed is the speed at which the laser head moves, usually in IPS (inch / second), which brings high production efficiency. The speed is also used to control the cutting depth. For a specific laser intensity, the slower the speed, the greater the cutting or engraving depth. You can adjust the speed through the panel of the laser engraving machine or computer software driver. The adjustment range of the motion control system of Guangxu laser engraving machine is 1%, so that the equipment can still obtain exquisite engraving quality in the engraving process.
4. engraving strength
The laser intensity on the material surface reflects the engraving intensity. For a specific engraving speed, the greater the intensity, the greater the depth of cutting or engraving. You can adjust the engraving force through the rocker of the laser engraving machine, or use the software driver of the computer. The greater the intensity, the faster the speed. The deeper you cut.
5. size engraving format
Lenses with different focal lengths can adjust the size of light spots. Small light spot lens is used for high-resolution engraving, and large light spot lens is used for low-resolution engraving. However, vector cutting is selected. The standard configuration of the new equipment is 2.0 inch lens.