Tips for maintenance of galvanometer:
The galvanometer is very afraid of getting dirty. For carbon dioxide laser marking and engraving machine, during the process of laser marking and engraving, more smoke will be generated, which may be accompanied by some fine impurities. Therefore, the most important thing is to Well equipped with a smoking fog device, or an exhaust device is the most good
When the laser equipment is not used, cover the galvanometer on the laser galvanometer to prevent dust and dirt.
Do not touch or touch the Laser Galvanometer with your hands or sharp blunt objects, otherwise the galvanometer will be easily damaged.
Clean the Laser Galvanometer regularly. Do not use paper towels for wiping. The paper towels are also rough. The correct cleaning method is to apply a non-woven towel cloth dipped in some alcohol water, and then gently wipe the surface of the ballast mirror.
In general, maintaining laser galvanometer is similar to maintaining glasses. If you have worn glasses, it is very simple for you. If you have not worn glasses, you should maintain them according to the above points. If the laser galvanometer is properly maintained, it can be used for 10 years.