At present, there are many factories using large-scale machines such as fiber laser cutting machines, and frequently exposed production accidents are also common in newspaper networks. A considerable part of factory accidents can be avoided through the popularization of common sense. All large machines have safety instructions, but most of them are not noticed by users. In particular, the newly purchased laser cutting machine is not familiar with the operation. Only when the laser cutting machine is operated in a standardized way and every operator follows this process can the safety production and the maintenance of the fiber laser cutting machine be maintained.
1 . Place the equipment in a dry, ventilated place with good air quality and sufficient space. After the new machine is placed in a suitable place, fix the treatment equipment
2 . The newly purchased equipment is from the manufacturer. Although the relevant parameters have been adjusted, tested and cut, the newly purchased machine can not help shaking during road transportation. After the newly purchased machine is landed, it needs to be readjusted on site
3 . When cutting with new equipment, please try to avoid cutting speed reaching the limit
4 . Most equipment supports 24-hour continuous operation, but during the operation of the new machine, avoiding 24-hour overload to catch up with the production capacity is not only applicable to the use technology of the new machine, but also applicable to the subsequent cutting work
5 . After the equipment arrives at the factory, professional after-sales service engineers shall conduct training on equipment operation. They must listen carefully and pay attention to the precautions for operation, so as to avoid machine failure caused by operational errors in a short time.
6 . In case of equipment failure, contact the manufacturer's after-sales service immediately.
In addition, the newly purchased laser cutting machine should pay attention to daily maintenance to realize the great utilization value of the equipment and prolong the service life of the equipment.