1. Check the machine and fix the workpiece correctly: check whether there are fragments on the machine tool, especially stone particles, large-area stone powder, sand, etc. pay attention to cleaning, otherwise it is easy to affect the flatness of the material. Place the workpiece according to the placement direction in the typesetting programming software to see whether the material is placed horizontally or vertically. Pay attention that the material is parallel to the direction of the machine axis and do not deviate. The pressing plate is used to fix the material. The general fixing methods include pressure and upper two. When pressing with a pressing plate, please be careful not to press the processed part of the material to prevent mechanical collision or tool collision.

2. Determine the origin of the workpiece coordinate system, which is often referred to as tool setting. Align the origin of each axis of the machine with the original point, and then return the data to zero or enter the coordinates of the corresponding coordinates.

3. Detect the water spray and water circulation, adjust the mechanical speed and feed speed, and simulate it in the control system of acrylic engraving machine.

4. Start the engraving machine.

5. Processing is completed. Confirm whether the engraving effect is satisfactory and whether it needs to be repaired.