Carbon dioxide laser engraving machine is an engraving machine using carbon dioxide laser technology. This kind of laser equipment is a general-purpose model with post focusing mode, small volume and high degree of integration.

The principle of laser engraving is: the laser beam is transmitted and focused on the material surface through the optical mechanism, and the material at the action point of the laser beam with high energy density vaporizes rapidly to form pits. The X-Y console is controlled by the computer to drive the laser head to move and control the switch of the laser according to the requirements. The image information processed by the software has been stored in the computer in some way. When the information is read from the computer in sequence, the laser head will scan back and forth from left to right and from top to bottom along the scanning track. Turn on the laser whenever a "1" point is scanned, and turn off the laser when a "0" point is scanned. The computer stores information in binary, which is just consistent with the two states of laser switch.

Carbon dioxide laser engraving machine is suitable for marking most non-metallic materials, such as paper packaging, plastic products, label paper, leather cloth, glass ceramics, resin plastic, bamboo and wood products, PCB board, etc.

Advantages of carbon dioxide laser engraving machine:

1. Wide range: carbon dioxide laser can carve and cut almost any non-metallic material. And the price is low!

2. Safe and reliable: non-contact processing is adopted, which will not cause mechanical extrusion or mechanical stress to the material. There is no "knife mark", which will not damage the surface of the machined part; Will not deform the material;

3. Precise and meticulous: the machining accuracy can reach 0.02mm;

4. Saving and environmental protection: the diameter of beam and spot is small, generally less than 0.5mm; Cutting and processing saves materials and is safe and hygienic;

5. Consistent effect: ensure that the processing effect of the same batch is completely consistent.

6. High speed and fast: high speed engraving and cutting can be carried out immediately according to the drawings output by the computer.

7. Low cost: it is not limited by the number of processing. For small batch processing services, laser processing is cheaper.