In recent years, metal laser cutting machines have become increasingly popular in the mechanical industry, but the purchase cost of laser cutting machines is not low. How to avoid a decrease in the cutting ability of the cutting machine in daily production? Today, Qingyuan Laser will briefly analyze the reasons.
1. Analyze the reasons for the decrease in cutting ability of metal laser cutting machines:
After long-term use of fiber optic metal laser cutting machines, the laser power will decrease, directly affecting cutting performance. The laser cutting speed is directly related to the laser power. The higher the power, the higher the cutting speed.
The focus position affects the cutting progress, and the diameter of the focus spot should be as small as possible to produce narrow cutting joints. If the cutting performance decreases, the focus position can be adjusted. The distance between the workpiece and the nozzle also affects the cutting effect. If the distance is too far, it will cause energy waste. If the distance is too close, it will affect the dispersion of splashing cutting products. In addition, the equipment performance of the fiber laser cutting machine will be reduced due to improper operation, long-term load production, and long-term maintenance, and the cutting effect will be greatly reduced.
2. Analysis of measures to prevent the cutting ability of metal laser cutting machines from decreasing:
Comply with the safety operating procedures of general cutting machines. The laser, dimming, and machine testing are strictly started according to the laser startup program. The fiber optic metal laser cutting machine should be operated by a dedicated person and trained by professional personnel: the operator must be familiar with cutting software, equipment structure and performance, and master relevant knowledge of the operating system. It is very important to execute the switch sequence correctly. Familiarize yourself with each switch panel button and operate fiber laser cutting machines correctly.
When the equipment is started, operators are not allowed to leave their positions or entrust management without authorization. If they really need to leave, they should stop or turn off the power switch. When any abnormalities are found during the processing, the machine should be immediately shut down, the fault should be promptly resolved or reported to the supervisor.
Pay attention to the maintenance of the fiber optic metal laser cutting machine. The fiber optic metal laser cutting machine has a long processing time and many parts will wear out, which obviously affects the performance of the processing equipment, so maintenance is very important. For vulnerable parts, they should be replaced frequently; After use, optical components should be wiped to maintain cleanliness; Bearings should be lubricated regularly to maintain driving flexibility and machining accuracy.
Metal laser cutting machines are widely used and cover many industries. Used in industries such as sheet metal processing, cabinets, lighting, mechanical processing, and hardware. If you need metal laser cutting and laser welding equipment, remember to call us.