As an important direction of laser applications, laser marking has broad application prospects in the modern processing industry. However, many friends may encounter situations where the laser marking machine cannot mark properly or does not emit light after using it for a period of time.
After careful investigation, if problems are found with the vibration lens, it is usually necessary to remove the vibration lens and return it to the manufacturer for maintenance. How to remove the vibrating mirror of the laser marking machine? Next, let's take you to learn:
The steps to remove the galvanometer are as follows:
1. To ensure that the marking equipment is completely powered off, we need to open the power cord connector of the marking head. If some styles do not have this connector, we can ignore it;
2. Remove the field mirror and provide protection and cover. Remember not to collide your fingers with the field mirror, especially the lens during operation;
3. When using hardware tools, it is generally an internal corner pickpocket to unscrew the head and be careful to prevent the removed outer shell plate from connecting to the vibration mirror drive plate and excessive pulling;
4. Carefully unplug all wires: power, signal, and motor to drive board;
5. Remove the drive board and package it, then remove the Y motor and X motor, and pay attention to packaging and placement. Pack the drive board together with the X and Y motors, so that the task of removing the vibration mirror is completed, and then it can be sent back to the manufacturer for repair.