CO2 laser generator uses the transition between the vibration and rotation energy levels of CO2 molecules to generate laser beam, and the laser beam is transmitted and focused on the surface of the material, causing the material irradiated by the high-energy laser beam to vaporize rapidly to form pits. Use the computer to control the X-Y console to drive the laser head to move and control the laser switch as required. The image information made by the software has been stored in the computer in a certain way. When the information is read from the computer in sequence, the laser head moves along the scan trace from left to right, from top to bottom, line by line to scan back and forth, and form an engraved pattern. With high power laser, laser cut can be realized. Generally speaking, 60W laser is mainly used for engraving, 80W laser, 100W laser, 130W laser, 150W laser, and 180W laser can be used for both engraving and cutting. Of course, the laser power is adjustable during operation. Turn it down for engraving and turn it up for cutting. The level of laser power will also affect the depth of engraving and the thickness of cutting.