With the development of laser cutting technology, fiber optic laser cutting machines have been widely used, and machines, like humans, may experience aging during long-term use, which can slow down cutting speed and reduce cutting accuracy, thereby affecting cutting performance. So how can we delay the aging speed of laser cutting machines? Large image laser provides answers for you.
1. Parameter settings
The factory parameters of the fiber laser cutting machine are pre-set. Due to the variety of plates to be processed, the manufacturer is open to users for parameter adjustment, and the parameters are obtained through long-term application practice. When using cutting equipment, long-term use beyond the standard (such as excessive speed, long-term cutting of anti material) can cause a gradual decrease in laser power or even damage to the laser. In addition, the laser itself will also experience a slight decrease in power as its service life increases. It is necessary to use the equipment according to the manufacturer's factory parameters to make the parameters suitable for the material being processed, which can effectively extend the service life of the cutting equipment.
2. Ensure a good usage environment
Laser cutting machines have certain requirements for the operating environment, including temperature, humidity, dust, etc. The temperature should not be too high or too low, as high temperature can cause a malfunction or slow machine response. Low temperature may cause the air duct to rupture, leak, or break. So it is necessary to control the temperature of the laser cutting machine workshop to delay the aging of various parts of the machine. Humidity can also affect the working condition and aging degree of the machine, and excessive humidity can cause rust on some parts of the machine, affecting its service life.
During the working process of laser cutting machines, a large amount of metal dust is generated, which adheres to the equipment and accelerates the wear between various components, thereby affecting cutting accuracy. Metal dust adhering to the lens can reduce the transparency of the lens, greatly affecting the performance and efficiency of the laser cutting machine. Maintain the environment around the laser cutting machine, ensure cutting quality, and regularly clean dust to ensure stable operation of the machine. Every day, use compressed air and a vacuum cleaner to remove dust and dirt from the surface of the fiber laser cutting machine console, electrical cabinet, and various equipment. Close the electrical cabinet door tightly to prevent dust. It is necessary to regularly remove the dust covers of each shaft, check whether the gears, racks, and guide rails are worn or have foreign objects, and clean and refuel them in a timely manner. Avoid affecting cutting accuracy and damaging the rack guide rail.
Grinding a knife does not harm the woodcutter. By doing the above tasks well, the long-term and stable operation of the fiber laser cutting machine can be guaranteed, continuously creating value.