Metal laser cutting machine use methods and techniques are as follows:

1, in the use of pre-inspection car steel belt, to ensure that in the tensioned state. Avoid the possibility of injuring people in the process of running out of problems, and serious will also threaten the safety of life. Therefore, it is very important to do a good job of detail work, be sure to do a good job of checking the work on a daily basis.

2, once a week with a vacuum cleaner to suck out the dust and dirt in the machine, all electrical cabinets should be closed tightly to prevent dust.

3, each guide rail should be frequently cleaned to exclude dust and other debris to ensure that the equipment is normal rack should be frequently wiped, add lubricant to ensure lubrication without debris. Guide rail should be frequently cleaned and lubricated, there is also the motor should be frequently cleaned and lubricated, the machine will be able to travel in a better alignment, more accurate cutting, cutting out the quality of the product will be improved.

4, the motor ring should also be regularly cleaned to clean the lubricant, which is conducive to ensuring that the operation of the metal laser cutting machine can be cut accurately, to ensure the quality of the cut product.

5, bifocal laser cutting head is a metal laser cutting machine on the fragile items, long-term use, resulting in laser cutting head damage.

6、To check and repair regularly. If there is deformation or other forms appear, this is the time to know that the laser cutting head may be a little damaged, and should be replaced. If not replaced will affect the cutting quality, increase costs, some products may have to carry out secondary processing, reducing productivity. Laser cutting head to find a professional manufacturer of production, the time of purchase should be carefully checked, so as to avoid problems when the time comes to use.

Finally, if you want to ensure the service life of the metal laser cutting machine, that every six months need to test the straightness of the track and verticality, once found abnormal to timely maintenance and debugging. Otherwise, it is possible to cut out the effect is not very good, the error will increase, affecting the cutting quality. This is the top priority, must be done.