Maintenance of laser engraving machine

1. Lens cleaning: Clean the lens regularly. In general, the editor recommends that the cleaning frequency be once a week. In special cases, the cleaning frequency should be adjusted appropriately according to the intensity of the equipment work. Customers whose processing materials are mainly wood, need to strengthen the cleaning frequency to ensure the processing efficiency and effect of the product.

2. Rail Care: Regular maintenance of the rail is recommended, at least once every 6 months, mainly to apply lubricant (industrial lubricant) to the rail. Customers who process fabrics, leather, plush and other materials should pay more attention to the maintenance of the guide rails. It is best to clean and maintain them in time after processing on the same day.

3. Water cooling system (for glass tube machines): Replace the cooling water for cooling the laser regularly. Customers who use water pumps should pay attention to prevent debris in the water. Once there is debris, it will enter the laser tube, which may cause the laser tube to fail to emit light. Use cold water Users of the laser machine should also pay attention to changing the water frequently in summer. It is recommended to replace it every two weeks to ensure the normal operation of the laser machine.

4. Intermittent use and maintenance (especially for university customers): If the equipment is not used for a long time, it is necessary to drain the water in the laser tube and wrap the equipment at the same time.