1. How to choose the power of a laser cutting machine? What is the difference?

How to choose the power of a laser cutting machine? What is the difference? When selecting equipment, the power of the laser is mainly based on the material you cut. In theory, the power of the laser is directly proportional to the thickness and density of the cutting material. Therefore, in terms of power selection, the selection should be based on the material.

Generally speaking, if the material is thin and easy to cut, non-metallic materials are used. If it is thick material or high density, high-power cutting is required. If the power is relatively low, it may not be possible to cut.

If you want to cut a thick material, it should be selected based on many aspects. If you want to cut the material well, power and material thickness are directly proportional factors. In some aspects, if the material is thick, only high power is not good, and there must be an appropriate focal length. If the focal length is incorrect and the cutting edge is not a vertical edge, it will result in diagonal edges.

In addition, even if the material is relatively thin, using a long focal length cutting effect is not good. Therefore, in order to achieve good cutting effect of the product, choose a reasonable power and focal length.

How much is the laser cutting machine?

The price of a laser cutting machine depends on the specific machine properties (laser cutting machine power, workbench, laser head, etc.). There are many domestic laser cutting machines, but they mainly depend on the buyer's needs, processing product type, thickness, etc. To evaluate the price of laser cutting machines. Most of the same power bands and configurations have similar prices, ranging from 300000 to 10000. The specific price depends on the laser power, cutting amplitude, and auxiliary selection facilities. Air compressor, voltage regulator, dust removal equipment. Core accessories for manufacturers and brands. Core accessories for manufacturers and brands. There is also the technology and services of laser cutting manufacturers.

How to adjust laser cutting burrs?

1、 Deviation in the position of the beam focus.

Solution: Adjust the position of the focus based on the generated offset position.

2、 Insufficient output power.

Solution: Check if the laser cutting machine is working properly. If there are any abnormalities, they need to be repaired in a timely manner. If normal, check if the output value is correct.

3、 The wire cutting speed of the cutting machine is too slow.

Solution: Timely adjust and improve wire cutting speed.

4、 Insufficient purity of auxiliary gas in the cutting machine.

Solution: Explain to improve the purity of the auxiliary gas.

Beam laser

5、 Cutting machine laser beam plus point offset.

Solution: Debug focus and adjust in a timely manner

6、 The laser cutting machine runs for too long, resulting in instability.

Solution: Turn off the machine and restart it, allowing it to rest.