After using the fiber laser cutting machine for a long time, or due to not paying attention during normal use, some faults may occur. If faults occur during use, it can affect the work. The following are some common faults and solutions for fiber laser cutting machines.

1

When the fiber laser cutting equipment is working, there is suddenly no problem with the laser coming out: the first reaction should be whether the power cord is loose, then check whether the power cord is damaged, and finally check the laser tube. We need to promptly eliminate and replace it.

II

The problem when there is a difference in the size cut by the fiber laser cutting equipment: first, check whether the fixed parameters of the equipment are set properly - whether the parameters on the computer are correct, whether the pulse number is normal, and a series of possible influencing factors. Finally, check whether the settings on the drawing software are correct.

III

The surface of the workpiece cut by the fiber laser cutting equipment is rough:

Check if the material we cut is within the cutting range of the entire equipment. If it is, adjust the focusing lens of the fiber laser cutting machine to make the fiber of the laser equipment focus finer and achieve better results.