Sheet metal is indispensable and widely used in industrial production and manufacturing today. For the convenience of storage and transportation, sheet parts are generally harvested into rolls.

The traditional method of sheet metal processing is to first use an uncoiler to uncoil and level it, then feed it into a shearing machine to cut it into a certain length of sheet metal. Finally, it is manually transported and loaded onto a laser cutting machine for cutting and unloading.

If coil cutting equipment and production lines are used, the cutting process can be omitted. After uncoiling and leveling, automatic cutting and unloading can be carried out, and all processes are completed on one equipment, with full machine operation and reduced manual involvement.

1. What is a coil laser cutting equipment

The coil material laser cutting equipment mainly consists of a CAD/CAM programming system, automatic uncoiling, leveling system, servo automatic feeding, and laser cutting system. It can automate production, greatly improve production power, reduce labor burden, and reduce costs. It has the characteristics of high power, high precision, and convenient operation.

2. Advantages of coil laser cutting equipment

1. Continuous cutting production with high equipment utilization rate. After the coil material is uncoiled and leveled, it is fed into the laser cutting machine by the feeding machine above the rotating workbench for cutting. Following the movement of the workbench, the process of cutting while feeding can be achieved, effectively shortening the cutting time of parts and improving the efficiency of equipment use;

2. Production has flexibility. Being able to respond to production changes at any time, and when the required parts change, being able to modify the two-dimensional graphics through programming software, cutting out the required parts, without requiring changes in the hardware structure of the equipment, has the flexibility to produce different products;

3. It has the function of active typesetting to reduce the occurrence of excess waste. The cutting host system itself has the function of active typesetting, and it can be mixed and produced at any time based on temporary demand for spare parts. The required parts are simulated and actively arranged on the computer to effectively reduce the occurrence of waste and reduce production costs as much as possible;

4. Low processing cost. The production process is proactive, which can save 2 workers, 14% materials, and improve efficiency by 30%, saving both money and time.