Users who have used laser cutting machines must know that the carbon steel laser cutting process is much more complex than the stainless steel laser cutting process. When processing carbon steel, laser cutting machines may encounter many unexpected problems, such as burrs at the bottom of the cutting surface, incomplete cutting, and continuous cutting. Among them, burrs are the most prominent problem. Let's analyze the specific reasons for these problems.

When laser cutting machine cuts carbon steel, burrs appear at the bottom of the cutting surface, which are mainly caused by:

1. Focus issues. The focus position of the laser is incorrect, and this problem can be solved by adjusting the focus.

2. Laser output power issue. Firstly, check whether the laser is working properly. On the premise of confirming the normal operation of the laser, further check whether the output power of the laser matches the required power of the sheet. If it does not match, it needs to be adjusted.

3. Cutting speed issue. Cutting too slowly can also cause burrs to appear at the bottom of the cutting surface, and it is necessary to accelerate the cutting speed.

4. Gas issues. The purity of gas can also affect the quality of cutting. When the purity of gas is not enough, such problems can also occur, and higher purity gas needs to be replaced for cutting.

5. Problem with the working time of carbon steel laser cutting machine. When the machine continues to work for more than a certain period of time, such problems may also occur, and it is necessary to restart the machine to try.