As a new favorite in the mechanical processing and manufacturing industry, fiber laser cutting machines are increasingly being loved by industry insiders. Compared to carbon dioxide laser cutting machines, fiber laser cutting machines have higher cutting efficiency and significant energy-saving and cost reducing effects. In order to enable the fiber laser cutting machine to achieve or maintain stable high efficiency and high output performance, it is necessary to repair the cutting head of the fiber laser cutting machine

Maintenance Guide for Cutting Head of Fiber Laser Cutting Machine

1、 Tips for prolonging the service life of fiber laser cutting heads. The relevant technical engineer informed the editor that if you want to extend the service life of the cutting head of the fiber laser cutting machine, you can use masking tape to encapsulate the upper part of the cutting head after the installation and debugging of the new laser cutting machine equipment. The purpose of doing so is to achieve effective dust and pollution prevention, which is more conducive to the protection of the cutting head of the fiber laser cutting machine.

2、 It is necessary for every laser cutting and processing master to consistently carry out the confirmation of dimming correction before starting each day. Before starting up and using every day, please check whether the laser is emitted from the center of the laser cutting head nozzle. If there is any deviation, please adjust the light in a timely manner and re locate the cutting reference point. If the reference point is correct, the focus of the optical path will be accurate and accurate, the cutting efficiency will be more efficient, and the cutting quality of the cutting workpiece will be better guaranteed.

3、 Regularly inspect and clean the ceramic body and ceramic ring of the cutting head of the fiber laser cutting machine. The relevant technical engineer informed the editor that the ceramic body or ceramic ring on the cutting head of the fiber laser cutting machine should not be underestimated. The roundness and cleanliness of the ceramic body, ceramic ring, and nozzle are also important factors to ensure the efficiency and quality of laser cutting processing. If foreign objects or dirt are found, a cotton swab dipped in isopropanol can be used for wiping and cleaning.

4、 Regularly inspect the protective lenses related to the cutting head of the fiber laser cutting machine. Most fiber laser cutting heads that can be seen on the market now have upper and lower protective lenses. The main function of the upper protective lens is to prevent dust and other foreign objects from falling onto the cutting head focusing lens group. The function of the lower protective lens is to prevent foreign objects such as cutting debris from contaminating the cutting head. Regularly check the protective lenses for dirt, patterns, or water mist. If one of the above situations occurs, wipe and clean them with isopropanol. If the wiping and cleaning are not clean, it is necessary to replace the upper and lower protective lenses in a timely manner for treatment.