Laser marking machine
How to maintain the fiber laser marking machine?
2023-04-07 13:59:01 technical college

With the rapid development of fiber laser marking technology, fiber laser marking machines have gradually become an important force in the field of laser marking and are widely used in many fields. Its good beam quality, high reliability, low maintenance cost, and high efficiency also make it highly competitive in the current market of laser marking equipment and highly favored by users.

Of course, as a highly precise machine, laser equipment, even with very high performance, cannot do without daily maintenance and upkeep. Only in this way can the equipment maintain its optimal operating state during the processing, avoiding the overall processing effect being unsatisfactory due to minor errors. If a laser equipment is not maintained, it will cause significant damage to the equipment, mainly reflected in changes in processing accuracy, reduced reliability, and reduced service life. So, as the most popular fiber laser marking machine in the current market, how to maintain it?

Here are a few points for everyone to introduce:

1. Regular cleaning F- θ The protective glass of the lens should be fixed and wiped with a dust-free cloth dipped in a small amount of alcohol in one direction every day;

2. Regularly check the operation status of the air cooling equipment, and replace it in a timely manner if it does not operate properly;

3. Keep the workbench clean and regularly clean the mouse and keyboard;

4. For the dust on the laser fan and air duct, it is necessary to regularly use an air gun to handle it along the direction of the air duct when the equipment is powered off;

5. When auxiliary gas is needed, it is necessary to check the pressure of the auxiliary gas before starting the machine. If the gas pressure is not enough, it is necessary to check whether there is any leakage in the pipeline;

6. Regularly check whether each control button is normal and check whether the indicator light is normal;

7. Before processing, check if there are any impurities in the focusing lens;

8. Check if there are any changes in the software related parameter settings before processing;

9. After completing work every day, follow the relevant shutdown steps to shut down, and then turn off the power;

10. After completing the work, it is necessary to promptly clean up the processing waste, clean the work site, and keep the work site neat and clean.

Hot keywords

Redsail Tech Co. © 2002-2022. All Rights Reserved.

Contact us