The severe winter is coming soon, and the temperature in most areas will drop below zero. This temperature is a huge challenge for laser cutting machines. If the temperature is too low, resulting in damage to laser cutting machine equipment, the consequences are also very serious. How to maintain and protect laser cutting machines in winter?

How to maintain laser cutting machines in winter

Low temperature poses a great threat to the water cooling system of laser cutting machines, and once frozen, it can cause irreparable damage. Large image laser helps you take precautions before the harsh winter arrives:

1. When the temperature drops below zero, heating equipment such as air conditioners can be installed in the workshop where the laser cutting machine works to ensure that the working environment is above zero;

2. Keep the laser cutting machine powered on 24 hours a day, and the water chiller does not power off at night. Ensure that the water in the pipeline is always flowing and that the flowing water is not easy to freeze;

3. In northern areas where the temperature is too low, the effect of installing air conditioning and heating in factories may not be obvious. Special reminder: it is necessary to add antifreeze in proportion;

4. In winter, don't forget to replace the cooling water frequently. Dirty cooling water can cause serious damage to the motor. It is very important to ensure the cleanness of the cooling water and the normal operation of the water pump;

5. It is important to ensure that the indoor temperature reaches the minimum temperature for refueling, especially in northern areas, otherwise sometimes the machine may not move due to the addition of engine oil.