The application field of laser cutting machine involves mobile phones, computers, sheet metal processing, metal processing, electronics, printing, packaging, leather, clothing, industrial fabrics, advertising, technology, furniture, decoration, medical equipment and many other professions, so the method of selecting and cutting machine should be paid attention to.

1. First, make clear the production range, processing materials and cutting thickness of your enterprise, so as to determine the model, format and quantity of the equipment to be purchased, and make a simple foil for the later procurement. The application field of laser cutting machine covers mobile phones, computers, sheet metal processing, metal processing, electronics, printing, packaging, leather, clothing, industrial fabrics, advertising, technology, furniture, decoration, medical equipment and many other professions. The mainstream products on the market are 3015 and 2513, that is, 3 meters by 1.5 meters and 2.5 meters by 1.3 meters, but the format is not a problem. Generally, companies will have many formats for customers to choose and can customize.

2. The staff can take their own materials to the manufacturer for proofing when they conduct on-site simulation processing or supply processing schemes.

1) Slit size: the slit cut by laser is generally 0.10mm-0.20mm;

2) Smooth cutting surface: whether there is burr on the cutting surface of laser cutting; Generally speaking, the laser cutting machine has a bit of burr, which is mainly determined by the cutting thickness and the use of gas. Generally, there is no burr below 3mm. Nitrogen is good for gas, followed by oxygen, and air is poor. The fiber laser cutting machine has few or no burrs, the cutting surface is very smooth and the speed is very fast.

3) Look at the deformation of the material: the deformation of the material is very small

4) Size of power: For example, most factories cut metal plates below 6mm, so there is no need to buy high-power laser cutting machine. 500W optical fiber laser cutting machine can meet the production demand. If the output is large, it is worried that 500W power is not as good as high-power laser cutting machine. The good choice is to buy two or more small and medium-sized power laser cutting machines, so it is helpful for manufacturers to improve the control cost.

5) The central part of laser cutting: whether the laser and laser head are imported or domestic, the imported laser generally uses more IPG, and the domestic laser generally uses more Ruike. In addition, other parts of laser cutting should also be noted, such as whether the motor is imported servo motor, guide rail, bed, etc., because they affect the cutting accuracy of the machine to a certain extent. One thing that should be paid special attention to is the cooling system of the laser switch on - the cooling cabinet. Many companies directly use household air conditioners for cooling. In fact, everyone knows that that effect is very bad. The good way is to use industrial air conditioners, special aircraft, to achieve a good effect.

3. Any equipment will be damaged in different degrees during use, so whether the repair is timely after the damage becomes a problem to be considered. Therefore, it is necessary to know whether the after-sales service of the enterprise is in place through various channels when purchasing.