First of all, what is the thickness of cutting? Generally speaking, laser cutting is recommended to cut carbon steel not more than 12mm and stainless steel not more than 6mm. There is a misunderstanding that needs to be corrected. The cutting thickness of laser cutting is not a high-quality cutting thickness. What's the meaning of this? For example, the cutting thickness is 16 mm, that is, the machine can cut 16 mm, but it is not suitable for long-term cutting of 16 mm. Just like the larger speed of the car is 200 yards, it cannot run 200 yards directly, which will affect the service life of the machine.

Secondly, as for the width, the mainstream in the market is 3015, that is, 3 meters by 1.5 meters. The width is not a problem. Generally, companies have many widths for customers to choose.

Secondly, the problem of the degree of burr is actually of great concern to customers. Generally speaking, solid yag has a little burr, which is mainly determined by the cutting thickness and the use of gas. Generally, there is no burr below 4mm, the effect of gas nitrogen is better, the effect of oxygen is second, and the effect of air is poor. The advantages of metal laser cutting lie in thin plates. If you want to cut thick plates, it is recommended to choose CO2 cutting machine and water cutting. In addition, if you want less burr, you can choose fiber laser cutting machine. The cutting surface is very smooth and the speed is very fast.

Then about the configuration of the laser cutting machine. With the development of the laser industry, there are more and more brands of laser cutting machines, the prices are more and more chaotic, and the configuration of machinery is also biased. Many manufacturers ignore customers under the brand name. Here, I hope that customers will pay attention to the core part of laser cutting: whether the laser and laser head are imported or domestic, brand or brand. At the same time, other parts of laser cutting, such as whether the motor imports servo motor, guide rail, bed, etc., affect the cutting accuracy of the machine to a certain extent. One thing that needs special attention is the cooling system of the laser cutting machine - cooling cabinet. Many companies directly use household air conditioners for cooling. This effect is very clear to everyone, and it is very bad. A better way is to use industrial special air conditioners and special machines to achieve better results.

Specific operation steps of laser cutting machine.

1. Turn on the machine in strict accordance with the regulations and the principles of turning on and off the power supply, and do not force it to turn off or turn it on

2. Turn on the air switch, emergency stop, and key switch (see if the water tank temperature has alarm display)

3. Turn on the computer, and then turn on the start button after the computer is fully started.

4. Turn on the motor in order to make the energy, follow-up, laser and red light buttons.

5. Start the machine and import the CAD drawing.

6. Adjust the initial processing speed, tracking delay and other parameters.

7. Adjust the focus and center of the laser cutting machine.