How to improve the efficiency of optical fiber laser marking machine in marking? When setting parameters, accurate cooperation is required to make laser marking more perfect. What factors will affect the efficiency of our fiber laser marking machine?

1. Marking depth of optical fiber laser marking machine.

If the surface marking depth is slightly larger, it is necessary to increase the calibration parameters and increase the laser power, which will take some time to calibrate the depth, resulting in a decrease in the overall marking speed.

Optical fiber laser marking machine improves efficiency daily work.

2. Optical fiber laser marking machine excites the light marking machine to focus the light spot. The light spot passes through the light spot of the focusing mirror, and the smaller the light spot is, because the size of the light spot is small. In fact, other interferences may have a slight impact on the quality of the light spot.

3. The size of the contents marked by the fiber laser marking machine, and the marking of large contents, will deflect the galvanometer to meet the requirements of larger marking. But this is slower than marking without content.

4. The marking density of the fiber laser marking machine is longer than the marking speed. For equal-format marking, the sparse marking only takes 2 minutes with the UV laser marking machine, while the density may take 5 minutes. After all, the marking density is high.

Laser marking machine

Optical fiber laser marking machine improves efficiency daily work.

We will tell you some common problems that need attention in the use of laser marking machines every day. These are some basic common sense problems, which need our attention. We should not make the machine unusable because of some small problems.

1. Line problems; When using the laser marking machine, the voltage should be stable, and it must be ensured that there is no line fault in the way. This technology requires users to check the use of the line-end pump laser marking machine, as well as some switches, to ensure that the laser marking machine will not have problems during use.

Optical fiber laser marking machine improves efficiency daily work.

2. Switch on/off problem; If the marking machine is used frequently, it can be opened for a long time, but it needs to be opened when the time is not long. It is seen that some users only use it for a period of time a day, but it takes a long time to start, which is a great hazard to the use of the laser marking machine.

3. Regular inspection; This is a routine project, requiring users to know some maintenance knowledge.