The water chiller of the optical fiber laser cutting machine must be regularly maintained and maintained, so as to ensure that the machine operates in good condition. If there is a fault, please remember not to handle it without authorization, and ask professional technicians to repair it, and do not disassemble the machine by yourself. The following aspects should be paid attention to during the daily maintenance of the water chiller of the fiber laser cutting machine:

1. Clean the radiator regularly. The cleaning method is: brush the radiator carefully with a brush, and then blow it clean with compressed air. If necessary, clean and wash it with water mixed with special air conditioner fin cleaning agent.

2. Regularly dust the condenser (the method is the same as above).

3. Regularly check the water level in the water tank of the chiller. If the water level is too low, add purified water or deionized water in time.

4. Regularly check the wiring terminals of electrical appliances and remove dust (after power off).

5. Regularly check the joints in the water system for water leakage and the pipeline for aging. If there is water leakage, replace the relevant components in time.

6. Regularly check the water quality in the water tank of the chiller. If the cooling water quality becomes poor, turbid, and the transparency decreases, all the deteriorated cooling water should be drained in time and replaced with new cooling water.

7. Clean the impurities on the filter element regularly. If the filter element is damaged, replace it in time. The replaced filter element must be the standard filter element required by the manufacturer.