The exchange platform laser cutting machine is the cutting equipment that two exchange platforms exchange material and cut, which greatly saves the waiting time for material loading and improves the cutting efficiency. The fiber laser cutting machine has high cutting efficiency, small heat affected zone, beautiful and firm cutting seam, low operation cost, and powerful operation software. It is an advanced flexible processing tool necessary for processing high-quality products.

Equipment management is based on production, operation and construction, and its purpose is to achieve good investment results at economic cost. Therefore, relevant measures must be taken to ensure that the laser cutting machine of the exchange platform is always in a good condition, and also to ensure the safety of the operators. Fire prevention and discharge is the primary task. Next, we will introduce the precautions for electricity and fire prevention of the laser cutting machine on the exchange platform.

1、 Precautions against electricity:

1. When the laser cutting machine of the exchange platform is powered on or the machine is running, do not touch any electrical components in the electrical cabinet and the operating platform, or electric shock will occur.

2. Please do not operate any switch knob with hands stained with water to prevent electric shock.

3. Please do not check the line or replace the electrical components with electricity.

4. Maintenance personnel with corresponding technical qualifications should be required to maintain the equipment in strict accordance with the electrical maintenance technical requirements to avoid accidents.

2、 Fire precautions:

1. When using the laser cutting machine on the exchange platform, check whether the gas path is complete and sealed. If there is leakage, these flammable gases will burn;

2. It is recommended to keep away from open fire when using the laser cutting machine on the exchange platform, otherwise it is easy to cause fire due to high temperature;

3. Do not let the light spot of the laser cutting machine on the exchange platform stay in one place all the time, so as to effectively prevent fire.