The laser is a vulnerable part of the metal laser cutting machine, so both operators and business owners should pay attention to it in daily use. How to slow down the aging of metal laser cutting machine? In fact, there are two reasons for the power reduction of fiber laser cutting machine:
First, the machine needs to regularly check and maintain the external optical path of the laser generator. In fact, the power of metal laser cutting machine will decrease after continuous use for a period of time. When the power is reduced to affect production, it is necessary to maintain the laser and external optical path. When the maintenance is completed, the cutting capacity will return to the factory level.
Maintenance and maintenance of laser: laser is the head part of metal laser cutting machine. Its quality directly affects the overall performance of metal laser cutting machine. If its quality has problems, it will accelerate the rapid aging of metal laser cutting machine. Therefore, the key point is to select high-quality lasers. In addition, the maintenance work in the later stage is also very important. Like a person, even the best skin needs to be maintained. Only by doing enough daily care and maintenance can we delay aging and make our youth longer. After the laser works for a period of time, the power decline is inevitable. Therefore, doing a good job in the maintenance work of the laser at ordinary times can try to keep the laser function at a standard and postpone the aging problem of the laser.
Secondly, the environment and conditions of the production site have a great impact on the power of the metal laser cutting machine. Such as the quality of compressed air. There is a lot of dust and smoke in the production site. Some users put paint painting near the fiber laser cutting machine, which will affect the power of the fiber laser cutting machine, and then lead to the reduction of cutting quality and cutting ability.
The use environment of metal laser cutting machine: the use environment of metal laser cutting machine (such as temperature, dust) The metal laser cutting machine has certain requirements for the temperature of the workroom. Too high temperature will cause a crash and slow response, and too low temperature will cause damage to the gas pipe and cable, easy to break and leak. Therefore, controlling the temperature of the working environment of the metal laser cutting machine is one of the key factors to delay aging. In addition, the metal laser cutting machine will produce a large amount of metal dust during operation. These dust and dust and smoke in the air will attach to the equipment, which will increase the wear strength between various parts of the equipment. At the same time, the attached dust will also affect the transmittance of the focusing lens, and indirectly affect the cutting accuracy of the metal laser cutting machine.
The aging of metal laser cutting machine is an irresistible trend. How to do a good job of protection and delay aging is the key issue. I hope users can do a good job of maintenance in their daily work. In addition, if any problem occurs during the operation of the equipment, it should not be ignored. It should be handled in time to keep the equipment in good condition.