The laser cutting machine achieves the cutting effect by means of high energy conversion. It works automatically under the control of computer program, with high accuracy and speed. The energy generated by the laser is transferred to the cutting head through conversion. The laser beam irradiates the material surface to form a tiny light spot. The area irradiated by the light spot is instantly melted. The cutting head moves back and forth so that the material can be processed into the desired shape.

When we operate the laser cutting machine, if we do not pay attention to it, it is very dangerous if mechanical failure occurs. The operator must undergo professional skill training and wear protective equipment before operating the laser cutting machine. Nine precautions for safe operation of the laser cutting machine are summarized.

9 laws for operating laser cutting machine

1. Novice must undergo professional skill training before operating the laser cutting machine, be familiar with the structure of the equipment, and fully grasp the basic operating knowledge.

2. Strictly follow the safety operation rules of the laser cutting machine and start the machine according to the process.

3. Before operating the laser cutting machine, you should wear protective equipment to protect the personal safety. Do not watch the laser beam with naked eyes for a long time

4. The surrounding environment of the laser cutting machine shall be kept dry and tidy. It is strictly prohibited to stack flammable and explosive materials. Fire extinguishing equipment shall be placed in a place within easy reach.

5. In case of mechanical failure during the operation of the laser cutting machine, the equipment shall be shut down immediately and reported to the technician for troubleshooting.

6. During the operation of the equipment, it is strictly forbidden for operators to leave their posts without authorization, so as to avoid accidents caused by the laser cutting machine going out of the effective travel range or the collision between the two sets.

7. After the laser cutting machine system is started, it should manually run at low speed to check whether the X, Y axis and linear guide rail are abnormal.

8. Before mass processing of unknown materials, a small amount of tests should be carried out and the operation conditions should be recorded.

9. The laser cutting machine shall be regularly maintained, and the lubrication of moving parts and wear of consumables shall be checked regularly.