The stainless steel laser cutting machine can cut any shape for different metal materials! However, the stainless steel laser cutting machine is also the same as people. Sometimes there are some problems like this or that, but many times it will be ignored by the operator! Xinquanli Laser is here to remind you that the following problems of stainless steel should not be underestimated!

The questions are as follows:

1. Measure the jitter when the stainless steel laser cutting machine is running.

The probability of such clearness is relatively low. Generally, it is caused by the imprecision of the manufacturing process. A large part of the reason lies in the excessive clearance of the sliding block and the poor contact between the motor and the driver. It should be handled and solved in time.

2. Serious burr occurs during laser cutting of sheet metal.

In this case, we should first analyze whether the laser power is up to standard, then check whether the laser works normally, and then make the correct adjustment. Secondly, analyze whether the focusing of the laser cutting machine is accurate, and then adjust it according to the offset.

3. The laser cutting machine cuts the opaque workpiece.

In this case, first check whether the reflector is intact or stained, which directly affects the laser conductivity. Secondly, check whether the laser tube has any trace of attenuation. If the energy is not reached, the cutting performance will be greatly affected. Remember to replace it in time.

When the above problems occur, we must carefully check the equipment and solve them in time. If the "long illness" is prone to major problems, leading to the stop of the stainless steel laser cutting machine, the enterprise will face major losses!