Before starting the laser cutting machine, push the beam forward and backward to ensure that there is no abnormal noise when moving left and right, and no obvious obstruction before powering on. When the laser cutting machine completes the work of the day, it should carefully clean up the waste and debris in the machine, so that the machine movement system can avoid being damaged by the operation of foreign objects. Clean the moving parts of the laser cutting machine to keep the machine in good working condition. The specific methods are as follows:

1. Add a little lubricating oil to the screw, including the screw on the laser tube support and the first reflector, to facilitate the disassembly and assembly during maintenance. Note: Do not add lubricating oil to the timing belt, drag chain, air pipe, motor, sensor, lens and wire.

2. Do not place objects in the laser cutting machine to avoid unnecessary damage to the machine.

3. Clean the dust and foreign matters on the metal oil tanker, metal shaft, sliding block and linear guide rail of the laser cutting machine with cotton cloth, and then add lubricating oil, and carry out idle reciprocating movement to make the lubrication more sufficient.

Operation loss is different from natural operation loss. It can be minimized through good usage habits. In short, it is "controllable". So we must strengthen our professional quality and create more value for the enterprise.