The metal processing industry is becoming increasingly powerful. Can it cut all metal materials? We all know that the metal laser cutting machine is not only of good quality, but also has intelligent cutting conditions and non-contact processing. Now let's take a look at whether the metal laser cutting machine is suitable for cutting any material.

1. Stainless steel cutting

Laser cutting is an effective processing tool for the manufacturing industry using stainless steel sheet as the main component. Under the strict control of heat input measures in the laser cutting process, the heat affected zone of trimming can be limited to become very small, thus effectively maintaining the good corrosion resistance of such materials.

2. Carbon steel cutting

The metal laser cutting machine can cut carbon steel plates with a thickness of 25 mm. It uses advanced laser technology, with good beam quality, small cutting seam and smooth cutting surface. It only needs to blow air instead of oxygen to cut carbon steel plates with a thickness of less than 5 mm, which greatly saves the cost of using oxygen for users.

3. Cutting of copper material

Why is it necessary to add auxiliary gas when cutting high-reflective metal materials? When the metal laser cutting machine cuts metal copper, the added auxiliary gas reacts with the material at high temperature to increase the cutting speed. For example, using oxygen can achieve the effect of combustion support. For laser cutting equipment, nitrogen is an auxiliary gas to improve the cutting effect. For copper materials below 1MM, metal laser cutting machine can be used for processing.

Therefore, when using a metal laser cutting machine, you should not worry about whether it can be cut off. At this time, you should pay attention to the processing effect, so nitrogen is used as the auxiliary gas. When the thickness of metal copper reaches 2MM, nitrogen cannot be used for processing. At this time, oxygen must be added to oxidize it before cutting can be realized.

4. Cutting of other metal materials

Laser cutting machine is suitable for non-contact cutting, hollowing and punching of various metal plates. With the advantages of high precision and high speed, it has become the development direction of sheet metal processing technology.

These are the common cutting materials of metal laser cutting machine, and the cutting efficiency is also greatly improved, so it can be popularized in a short time.