Now the advertising industry needs more and more materials. In addition to some commonly used materials such as acrylic, galvanized sheet, wood, etc., iron plate, carbon steel, stainless steel, titanium steel plate, etc. are also used more and more. This also makes the demand for fiber laser cutting machines increasingly large. So why do we use fiber laser cutting machines for advertising production?

1. High cutting accuracy. The positioning accuracy of laser cutting machine is 0.05mm, and the repeated positioning accuracy is 0.03mm.

2. The laser beam is focused into a very small light spot, and the power at the focus is large. The material is quickly heated until it is vaporized and evaporated to form a hole. With the linear movement of the beam, the hole continuously forms a very narrow slit, and the width of the notch is generally 0.1-0.2mm.

3. The cutting surface is free of burrs, and the roughness of the cut surface is generally controlled within Ra6.5. The cutting speed can reach 10 m/min, and the positioning speed can reach 30 m/min, which is much faster than the wire cutting speed.

4. Non-contact cutting, the cutting edge is little affected by the heat, and the workpiece thermal deformation will not occur, completely avoiding the edge collapse caused by punching and shearing, and the cutting seam generally does not require secondary processing. The laser cutting head will not contact the material surface, so it will not scratch the workpiece surface.

5. Laser processing is flexible, and can process any irregular shapes, and can also cut pipes and other irregular materials. Laser processing does not need molds, does not consume molds, does not need to repair and repair molds frequently, and saves time to replace molds, thus saving mold processing costs and reducing production costs, especially suitable for the processing and production of large products.

6. Fiber laser cutting machine adopts computer programming, which can cut products of different shapes and improve the utilization rate of materials. The laser processing has less waste, low noise decibel, environmental protection, cleanness and safety, which greatly improves the working environment.