How to operate the fiber laser cutting machine safely is a problem that many friends are concerned about. As a production unit that is using this kind of machinery and equipment, it should establish some rules and regulations, or operating procedures, for safe operation of this kind of equipment. Operators should carefully study the rules and regulations of these operations before operating the machine. They should strictly follow the rules and regulations for operation and maintenance, so that the machinery and equipment can operate normally for a long time, such as this kind of machinery and equipment, There will be a very strict process for starting the laser, which should be strictly followed.
Before the operation of the fiber laser cutting machine, all operators must be trained. The purpose of the training is to understand the general performance of this machine and equipment, the general structure of this machine and equipment, and the knowledge of the operation of this machine system. No operator can operate without training and passing the examination. Relevant operators must wear necessary labor protection articles before operating the machine and equipment. Otherwise, can they go to the machine for operation? For example, this machine and equipment will generate laser beam when it is running, and the laser beam will cause some damage to human eyes. Therefore, operators must wear protective goggles before operation. Before operating this machine, it is necessary to determine whether the material can be heated and cut by this machine. If the material itself cannot be cut by this machine and equipment, it is forbidden to use this machine for processing. Otherwise, smoke may be generated during processing, and steam may also be generated, which may cause danger. Direct and indirect operators are not allowed to leave their posts without authorization during the operation process. If there is really urgent need to leave their posts, people must entrust others to take care of them before leaving their posts. Otherwise, they can only switch off the power supply and shut down the machine and equipment, and then the operators can leave their posts.
Some topics about how to safely operate the fiber laser cutting machine will be briefly introduced here. In addition, it should be noted that in order to operate safely, there should be readily available fire extinguishers around the workshop where the machinery and equipment are placed. In case of an accident, fire extinguishers can be of great use. If you don't need to use the machine for processing for a long time, you should turn off the laser at this time.