What are the precautions for the use of fiber laser cutting machine? There are many problems to pay attention to when using this kind of equipment. For example, when operating this kind of equipment, it is necessary to closely observe the operation conditions. If there are some abnormal conditions in the operation process, the emergency shutdown method should be adopted at this time, instead of forcing the machine equipment to run, and it is also important to note that when the machine equipment is running, All irrelevant people must stand outside the safe distance, and cannot touch the machinery directly to avoid causing collision accidents. Here are some common precautions for operating this machine.
There are still many problems to be noticed in the process of using the fiber laser cutting machine. For example, before processing a certain workpiece, you should first input the program for processing the workpiece into the computer, and then carry out the trial processing, and check whether the machine is in good condition during the operation process. If problems are found during the trial processing, you should shut down the machine to solve the problem. If the trial processing is successful, Only then can some parts be processed in batches. This kind of machine and equipment needs a simple maintenance after 40 hours of continuous operation, or a maintenance every week, and a major maintenance is required after 1000 hours of continuous operation, which is about six months. As a production unit, it is necessary to establish rules and regulations for the maintenance of machinery and equipment, and the operators should carry out maintenance and inspection of machinery and equipment in strict accordance with the rules and regulations. This kind of machine needs to use laser in the process of operation, and the laser itself will cause some damage to human eyes, so the direct operator must wear an eye mask to operate the machine and equipment. If a noise is heard during processing, the correct operation at this time should be to stop the machine, and then check and eliminate the fault. If the fault cannot be eliminated through inspection, the supervisor or the relevant person in charge should be reported. The machine cannot be started at this time.
The problems to be paid attention to when using the fiber laser cutting machine are briefly introduced. This machine is a power-saving and highly efficient machine that can carry out automatic operation. The cut surface is very smooth and can almost be used directly. It is a highly efficient and popular machine.