The fiber laser cutting machine itself is a kind of machine and equipment with very high efficiency. Especially now it can be operated automatically with CNC machine tools. However, some customers report that they have low efficiency when using this kind of equipment. At this time, we should find out the specific reason, so that we can find out the problem and solve the problem, so as to improve the production efficiency. Let's take a look at some common factors that can affect the operation efficiency of this machine.

During the use of the fiber laser cutting machine, the efficiency may be reduced due to the power problem. For example, some customers may choose to purchase a low-power machine and equipment. The power is small, but the thickness of the cutting parts or materials is large, which will lead to the reduction of the cutting efficiency. In this case, there are two solutions. The first is to replace a high-power equipment, The second way is to try to reduce the thickness of the cut material. In addition, another reason that affects efficiency is system instability. This kind of machine needs to be used in conjunction with the computer system. Some customers may have some unstable factors in the computer system. In this case, the efficiency may be reduced. For example, there may be some problems in the CPU or hard disk of the computer, which may lead to performance degradation, If the cutting accuracy or quality is reduced, you need to check the computer system as a whole. If there is something wrong with the hard disk, for example, the reading and writing speed of the hard disk is reduced, you may need to replace the hard disk at this time, or if the CPU performance is insufficient, you need to replace a powerful CPU. The third reason that affects the efficiency is that the drawing parameters are set incorrectly, or the design of the drawing itself is defective. At this time, you can only modify the drawing again, and then start the machine again to try cutting.

The reason why the efficiency of the optical fiber laser cutting machine decreases during the use process is simply introduced. In addition to the above reasons, there are many other reasons that can lead to the efficiency reduction. For example, it may be due to the lack of lubricating oil, which may lead to the efficiency reduction, or it may be due to the continuous start of the machine, which is too long, The internal parts are seriously worn and the wearing parts are not replaced in time, resulting in low efficiency.