How to solve the problems encountered when the laser marking machine is running? This kind of machine is a relatively sophisticated machine. If there is a problem, you should go to a professional technician to solve it. If there is no way for technicians in the factory to solve it, you should contact customer service personnel to solve the problem. Of course, there may be some common faults when the machine is running. As a practical operator, you should know how to solve these common faults. Here are some common faults and solutions.

If the local pattern is unclear during the operation of the laser marking machine, it may be caused by uneven thickness of the die plate, too low pressure or too low temperature, which will affect the progress. It is even possible that the damage of the molded plate may cause problems in the machinery and equipment. How to solve this problem may require replacing the molded plate. The second problem you may often encounter is that the printed patterns are very dim and lack luster. This may be caused by too low pressure or too low molding pressure. To solve this problem, you can adjust the pressure according to the clarity of the patterns, so that the patterns can achieve the desired effect. The third possible problem is that the printed icon is white and unclear, which may be caused by too fast molding speed or too high temperature. The solution is to adjust the molding speed. The fourth possible problem is that the marking is ambiguous. This may be caused by too high temperature, and the causes of the high temperature are very complex. It may be that there is a problem with the circuit inside, which causes the temperature to be too high, or there may be a problem with the cooling water, which causes the temperature to be too high. It is necessary to check and remove the fault one by one according to the common problems.

Here is a brief introduction to the problems that may occur during the operation of the laser marking machine. This kind of machine and equipment is used in many industries. It can be said that it is a machine with a very wide range of applications. Many customers often encounter some problems when using this machine. Small problems can be solved by themselves, but if they encounter problems that they cannot solve, they need to call customer service at this time, The production factory will have special technicians to help customers solve problems encountered in use.